Install Your Eaton Wifi Smart Switch in 6 Easy Steps

Upgrade your home with the Eaton Wifi Smart Switch. It's easier than you think!

Step 1: Gather Your Tools

Before starting the installation process, make sure you have the following tools handy: screwdriver, wire stripper, pliers, voltage tester, and of course, your Eaton Wifi Smart Switch kit.

Step 2: Turn Off Power

Locate your circuit breaker and turn off the power to the room where you plan to install the smart switch. This step is crucial for your safety.

Step 3: Remove Old Switch

Use your screwdriver to remove the old switch from the wall. Be careful not to touch any exposed wires.

Step 4: Connect the Smart Switch

Follow the wiring instructions provided in the Eaton Wifi Smart Switch manual. Connect the wires securely and double-check your work.

Step 5: Attach the Smart Switch to the Wall

Secure the smart switch to the wall using the screws provided in the kit. Make sure it is level and flush with the wall.

Step 6: Power On and Setup

Turn the power back on at the circuit breaker. Follow the setup instructions to connect your smart switch to your home's wifi network.

Enjoy the convenience of controlling your lights from anywhere with the Eaton Wifi Smart Switch!