SELF-POWERED WIRELESS SWITCHES

PRODUCT RANGE

Smart Plugs

Explore ESP32-C3, Tasmota and RF-controlled plug options.

ESP32-C3 · BUYER GUIDE

What does ESP32-C3 mean for your smart plug?

ESP32-C3 is an Espressif microcontroller with 2.4 GHz Wi-Fi and Bluetooth Low Energy. It provides processing and wireless connectivity inside a device. The finished plug design and installed firmware determine the functions your customers can use.

2.4 GHz Wi-Fi

The chip supports connection to a 2.4 GHz wireless network. Your project’s firmware defines setup and communication with the chosen app or system.

Bluetooth Low Energy

Bluetooth LE can support setup or other functions when implemented in the selected firmware. Confirm the intended Bluetooth experience for your product.

Firmware & integration

Agree the app, cloud service or local control system, switching behaviour and update requirements when defining your plug project.

For brands and system integrators

Consider this platform when planning a connected plug range for your own brand or control system. Discuss hardware, firmware and integration requirements together so the finished configuration matches your market.

Tell us what your project needs

  • Destination market, plug standard and supply voltage.
  • Connected appliance or load, and required current or power rating.
  • Preferred app or control system, cloud or local operation, and desired features such as energy monitoring.
  • Estimated quantity, branding, packaging and development schedule.

Product ratings, available functions and compliance documents are confirmed for the selected model and configuration.

Is ESP32-C3 the same as Tasmota?

ESP32-C3 identifies the chip platform; Tasmota identifies firmware. Tell us which firmware you need so we can confirm the suitable hardware and supported configuration.

Can this version pair with a kinetic switch?

For direct RF kinetic-switch control, explore RF-Controlled Plugs and ask us to confirm the required switch and protocol. ESP32-C3 connectivity alone does not establish that pairing.

TASMOTA · BUYER GUIDE

Local control for your smart plug project.

Tasmota is open-source firmware used on compatible connected devices. In a smart plug, it can provide local control and communication with an automation system. The selected hardware, firmware build and device configuration determine the features available.

Local browser control

Tasmota provides a web interface for device control and configuration on the local network. Local operation can work without a vendor cloud account.

MQTT messaging

MQTT lets the plug exchange commands and status with your automation system. This setup needs an MQTT broker: the service that passes messages between devices and software.

Home Assistant integration

Home Assistant can control supported Tasmota devices over MQTT. It needs a configured broker, the MQTT integration and a compatible Tasmota firmware build and device setup.

For local automation projects

Consider this range for smart home integration, local automation or an own-brand plug project. Agree how devices will be configured, connected and supported before selecting the product configuration.

Tell us what your installation needs

  • Destination market, plug standard, supply voltage and connected load.
  • Your automation system, Wi-Fi network and MQTT setup.
  • Required firmware build, device features and whether energy monitoring is needed.
  • Estimated quantity, branding, packaging and preferred setup or update process.

Confirm firmware, integration and electrical ratings against the selected model. Available firmware functions vary with the hardware and configuration.

Does Tasmota need a cloud account?

Basic local control uses your local network and can operate without a vendor cloud account. MQTT-based integration needs a broker. Access from outside the local network depends on your chosen automation and remote-access setup.

Does every Tasmota smart plug measure energy?

Energy monitoring depends on suitable metering hardware, a supported firmware driver and calibration. Tell us which measurements you need so we can confirm a suitable configuration.

Will a plug connect to Home Assistant immediately?

Plan for initial Wi-Fi, MQTT and device configuration. Home Assistant integration also requires a supported Tasmota build. Agree the required setup and test the selected configuration before a bulk order.

CONTACT ECO-NEWLEAF

LET’S DISCUSS YOUR PROJECT

Wireless kinetic switches, matching receivers and smart switches for your market.

Contact us